1. Parunov, J., Kevo, M., Computer aided design of curved girders for oil storage tank dome roofs, Nafta 44 (7-8) 371-375(1993)
2. Parunov, J., Dynamic analysis of vertical pressure vessels, 1st Congress Energetic and process plants , Dubrovnik, 1994. (in Croatian)
3. Parunov, J., Numerical model of jurnal bearing, Zbornik radova FSB XVIII, Zagreb, 1994. (in Croatian)
4. Senjanovic, I., Coric, V., Parunov, J., Mravak, Z., Ljulj, A., Donkov, I., Strength analysis of lower derrick substructure of jack-up drilling unit "Labin", Shipbuliding, 44(1996),2, 127-134
5. Senjanovic, I., Coric, V., Parunov, J., Mravak, Z., Ljulj, A., Donkov, I., Strength analysis of lower derrick substructure of jack-up drilling unit "Labin", Annual of Croatian Academy of Engineering, Zagreb, 1996.(in Croatian)
6. Senjanovic, I., Grubisic, R., Parunov, J., Donkov, I, Structural analysis of power transformer shell, 2nd Congress Energetic and process plants , Dubrovnik, 1996.
7. Grubisic, R., Parunov, J., Draganja, D., Influence of bearing stiffness and propeller precession on flexural vibration in marine line shafting, Transactions of FAMENA XX, Zagreb, 1996. (in Croatian)
8. Coric, V., Mravak, Z., Werner, A., Parunov, J., Kovsca-Obsieger, J.,Upgrading of semisubmersible offshore platform ”Zagreb I” for deeper sea, Shipbulding, 44(1996),2, pp.127-134.
9. Parunov, J. , Structural analysis of FPSO ship using VeriSTAR software, Proceedings of “SORTA – Theory and Practice of Naval Architecture”, Zadar, September 1998. (in Croatian)
10. Senjanovic, I., Parunov, J., Donkov, I., Strength analysis of a cruise ship hull in initial design stage, Shipbuilding, Vol. 47, No.4, 1999.
11. Tomasevic, S., Parunov, J. , Senjanovic, I. , Fatigue strength assessment of FPSO deck longitudinals, Transactions of FAMENA XXIII, pp.35-44, 1999. (in Croatian)
12. Senjanovic, I., Parunov, J., Tomasevic, S., Strength analysis of a cruise ship in early design stage, IMAM, Iscia, Italy, 2000.
13. Senjanovic, I., Coric, V., Parunov, J., Review of Ship and Offshore Structures Analyses, Annual of Croatian Academy of Engineering 2000., pp.41-48.
14. Senjanovic, I., Parunov, J., Tomasevic, S., Longitudinal setrength of cruise ship, 14. simposium “SORTA – Theory and practice of shipbuilding”, Rijeka, 2000.
15. Parunov, J. , Discussion on “Structural design of floating production systems”, Proceedings of the 14th International Ship and Offshore Structures Congress, Vol.3, Nagasaki, Japan, October, 2000. , pp.251-252, Publisher Elsevier Science.
16. Senjanovic, I., Tomasevic, S., Parunov, J., Strength analysis of cylindrical tanks in LPG Carrier, Shipbuliding 50, no.1, 2002.
17. J. Parunov, Hydrodynamic and Structural Analysis of FPSO Ship, Shipbuliding 50, No.3, 309-322, 2002.
18. Senjanovic, I., Fan, Y., Parunov, J., Transition from regular to chaotic oscillations of cubic dynamical system, 1st Congress of Croatian society of Mechanic, Pula, 1994.
19. Senjanovic, I., Cipric, G., Parunov, J., Nonlinear ship rolling and capsizing in rough sea, EUROMECH-2nd European Nonlinear Oscillation Conference, Prague, 1996.
20. Senjanovic, I., Cipric, G., Parunov, J., Nonlinear ship rolling and capsizing in rough sea, Shipbuilding, 44(1996),1, 19-24
21. Donkov, I, Parunov, J., Senjanovic, I., Application of the harmonic acceleration method in mooring analysis, Transactions of FAMENA XX, Zagreb, 1996. (in Croatian)
22. Senjanovic, I., Parunov, J.,Cipric, G., Safety analysis of ship rolling in rough sea, Chaos, Solitons & Fractals, Vol. 8, No. 4, pp. 659-680, 1997.
23. Senjanovic, I., Cipric, G., Parunov, J., Survival analysis of fishing vessel rolling in rough sea, 6th International Symposium "Technics and Technology in Fishing Vessels", Ancona, Italy, 1997.
24. Senjanovic, I., Cipric, G., Parunov, J, Probability of ship survival in rough sea, 6th International Conference on Stability of Ships and Ocean Vehicles - STAB ‘97, P.A. Bogdanov Editor, Varna,1997,Vol. II, pp 307-312.
25. Senjanovic, I., Cipric, G., Parunov, J., Survival analysis of fishing vessels rolling in rough seas, “The Nonlinear Dynamics of Ships”, Phil. Trans. R. Soc. Lond. A (2000) 358, pp.1943-1965, (invited papers).
26. Senjanovic, I., Cipric, G., Parunov, J., Simulation of ship nonlinear rolling and capsizing in rough seas, “Modelling in science, technics and society" , Rijeka, 2000.
27. Senjanovic, I., Parunov, J., Tomasevic, S., Rudan, S., Harmonic acceleration method and applications, WCCM, Vienna, 2002.
28. Senjanovic, I., Parunov, J., Tipping table principle for ship launching from horizontal berth, The 8th International Symposium “Technics and Technology in Fishing Vessels”, Ancona, 2001.
30. Senjanovic, I., Parunov, J., Dynamic analysis of tower buoy in regular waves, Shipbuilding 45(1997)2, 123-132
31. Senjanovic, I., Parunov, J., Static and dynamic analysis of tower buoy, Transactions of FAMENA XXI, 1997, p.53-62 (in Croatian)
32. Senjanovic, I., Parunov, J., Dynamic analysis of tower buoy in irregular waves, Proceedings of the Eighth (1998) International Offshore and Polar Engineering Conference (ISOPE), Montreal, Canada, May 24-29, Vol. I, pp.309-316
33. Coric, V., Mravak, Z., Parunov, J., Possibilities in upgrading of old generation offshore platforms for new requirements, “Welding in marine technology” , Haludovo’98, pp.245-263.
34. Parunov, J., Senjanovic, I., Rudan, S., Correlation analysis of calculated and measured response of articulated tower model in waves, Vibration, Noise and Structural Dynamics ’99, Venice, 1999, pp.54-60.
35. Parunov, J. , Senjanovic, I. , Review of statistical models for ship reliability analysis, Proceedings of the Seventh International Symposium on Practical Design of Ships and Mobile Units (PRADS), ( Edited by M.W.C. Oosterveld and S.G. Tan ) The Hague, The Netherlands, September 1998, pp. 273-280.
36. Parunov, J. , Senjanovic, I. , Joint probability distribution of significant wave heights and mean zero-crossing periods, Transactions of FAMENA XXIII, pp.25-33, 1999. (in Croatian)
37. Parunov, J. , Senjanovic, I. , Approximate procedures for estimation of nonlinear wave loads on ship structure, Transactions of FAMENA XXIV, pp.75-84, 2000. (in Croatian)
38. Parunov, J. , Senjanovic, I. , Methods for long-term prediction of extreme sea states, Shipbuilding 48(1), pp.131-138, 2000. (in Croatian)
39. Parunov, J. , Senjanovic, I. , Tomasevic, S., On the modelling uncertainty of the linear wave bending moment, International Conference on Ship and Shipping Research (NAV), Vol.II,pp. 7.8.1-7.8.10, Venice, Italy, September 2000.
40. J. Parunov, I. Senjanovic, On the IACS UR S11 for longitudinal ship strength, “SORTA – Theory and practice of shipbuilding”, Trogir, 2002.
41. J. Parunov, I. Senjanovic, Influence of Wave Steepness on Extreme Ship Hull Vertical Wave Bending Moments, MARINE 2003, Szczecin, Poland
42. Senjanovic, I., Parunov, J., Tomasevic, S., Contribution to ship slamming and whipping analysis, Shipbuliding 48(2000)3, pp.203-214.
43. Senjanovic, I., Parunov, J., Tomasevic, S., Investigation of ship slamming and whipping, European Conference: Marine Technology-Industry & Simulation, SIM. OUEST 2000, Nantes, France.
44. Senjanovic, I., Tomasevic, S., Parunov, J., Numerical procedure for ship whipping analysis, Shipbuilding 49(2001)2,pp.171-180.
45. Senjanovic, I., Tomasevic, S., Parunov, J., Analytical solution of pontoon transient vibration related to investigation of ship whipping , International Shipbuilding Progress 48, no.4 (2001), pp.305-331.
46. Senjanovic, I., Parunov, J., Slamming and whipping analysis of large container ship, The 11th International Offshore and Polar Engineering Conference, ISOPE 2001, Stavanger, Norway, 2001.
47. Senjanovic, I., Parunov, J., Vundac, M., Slamming and Whipping Analysis of a Fregate, IMAM 2002, Crete, Hellas.
48. I. Senjanovic, S. Tomasevic, J. Parunov, Ship Slamming and Whipping Analysis in Rough Seas, Shipbuilding, Vol.51, No.1, 2003.
49. Senjanović, I, Ljuština, A.M., Parunov, J., Natural Vibration Analysis of Tensioned Risers by Segmentation Method, Oil&Gas Science and Technology, 61, No.5, pp.647-660, 2006. (CC,SCI)
50. Parunov, J., Senjanović, I., Guedes Soares, C. Hull-girder reliability of new generation oil tankers. Marine Structures. Vol. 20 (2007), No.1-2, 49-70. (CC,SCI -Expanded)
51. Parunov, J., Guedes Soares, C. Effects of Common Structural Rules on hull-girder reliability of an Aframax oil tanker. Reliability Engineering and System Safety. 93 (2008), No. 9; 1317-1327. (CC,SCI)
52. Guedes Soares, C., Parunov, J. Structural Reliability of a Suezmax Oil Tanker Designed According to New Common Structural Rules. Journal of Offshore Mechanics and Arctic Engineering. 130 (2008), No. 2; 17-27. (CC,SCI -Expanded)
53. Parunov, J., Ćorak, M., Guedes Soares, C. Structural Reliability of a Chemical Tanker, Marine Technology , 46 (2009), No.4, 192-199 (CC, SCI-Expanded)
54. Senjanović, I., Parunov, J., Rudan, S. Remedy for Misalignment of Bilobe Tank Heads in Liquefied Petroleum Gas Carrier, Brodogradnja, 60(2009), No.3, 290-297. (SCI – Expanded)
55. Parunov, J., Senjanović, I., Incorporating Model Uncertainty in Ship Reliability Analysis, SNAME Transactions, Vol.111, pp 377-408, 2003. (SCOPUS)
56. Parunov, J., Senjanović, I., Pavićević, M., Use Of Vertical Wave Bending Moments From Hydrodynamic Analysis In Design Of Oil Tankers, International Journal of Maritime Engineering (Transactions RINA Part A4), Vol.146, pp 51-64, 2004.
57. Senjanović, , Ljuština, A.M., Parunov. Analytical procedures for natural vibration of tensioned risers. International Shipbuilding Progress, 53 (2006), 3; 155-182. (CPX, SCOPUS)
58. Jurišić, P., Parunov, J., Senjanović, I. Assessment of Aframax Tanker Hull-Girder Fatigue Strength According to New Common Structural Rules. Brodogradnja. 58 (2007), 3; 262-267 (BMT)
59. Žiha, K., Parunov, J., Tušek, B., Granična čvrstoća brodskog trupa, Brodogradnja, 58(2007),1, pp.29-41
60. Ljuština, A., Parunov, J., Senjanović, I., Dynamic behaviour of deep water marine riser, 4th Congress of Croatian Society of Mechanics, Bizovac, September 2003.
62. Guedes Soares, C. & Parunov, J. 2006. Structural reliability of a suezmax oil tanker designed according to new joint tanker project rules. Proceedings of the 25th International Conference on Offshore Mechanics and Artic Engineering, (OMAE2006), ASME, New York, Paper no. 92650.
63. Parunov, J., Žiha, K.; Mage, P. Corrosion wastage of oil tankers – A case study of an aged ship // IMAM 2007 / Guedes Soares & Kolev (ur.), Varna: Taylor & Francis Group, 2008. 271-276.
64. Parunov,
J., Senjanović, I. , Donkov, I. Structural analysis of asphalt
carriers // 10th
International Symposium on Practical Design of Ships and other Floating
Structures PRADS 2007 / Roger I. Basu, Vadim Belenky, Ge (George) Wang,
Qing Yu (ur.).
Houston, 2007. 724-730.
65. Parunov J, Mage P, Guedes Soares, C., 2008, Hull girder reliability of an aged oil tanker, Proceedings of the 27th International Conference on Offshore Mechanics and Artic Engineering, (OMAE2008), ASME, Estoril, Portugal, Paper no. 57183.
66. Parunov
J, Ćorak M, Guedes Soares C, Statistics
of still water bending moments on double hull tankers, Analysis and Design
of Marine Structures, Eds. Guedes Soares & Das, Taylor & Francis Group,
London, 2009, Lisbon, Portugal, 16-18 March 2009.
67. Wang
G, Boon B, Brennan F P, Garbatov Y, Ji C, Parunov J, Rahman T A, Rizzo C,
Rouhan A, Shin C H, Yamamoto N, Condition
Assessment of Aging Ships and Offshore Structures, 17th
International Ship and Offshore Structures Congress, 16-21 August 2009, Seoul, Korea.
68. Ćorak,
Maro; Parunov, Joško; Kalman, Žiha. The relation of working and ultimate
longitudinal strength of a ship hull girder in service. // 13th Congress of
Intl. Maritime Assoc. of Mediterranean IMAM 2009, İ stanbul, Turkey, 12-15
Oct. 2009. Vol. 1, pp.117-124.
69. Parunov,
J., Žiha, K., Mage, P., Jurišić, P., Hull girder fatigue of corroding oil tanker. in: Advanced Ship Design for Pollution
Prevention, ed. Guedes Soares & Parunov,
70. Parunov, J., Senjanović, I.,
Pavićević, M., Determination of
Design Wave Bending Moment by Hydrodynamic Analysis, Zbornik radova
16.simpozija “SORTA – Teorija i praksa brodogradnje”, Plitvice, 2004.
71. Ljuština
A.M., Parunov, J., Senjanović, I.: Statička i dinamička analiza
uređaja za podmorsko bušenje, Zbornik radova 16.simpozija “SORTA –
Teorija i praksa brodogradnje”,
Plitvice, 2004.
72. Parunov, J., Senjanović, I. : Wave loads on oil tankers in the Adriatic
sea, Zbornik radova I. Savjetovanje
o morskoj tehnologiji, in memoriam Akademiku Zlatku Winkleru, Rijeka, 2005,
pp.98-111.
73. Parunov, J., Discussion on “Time-Dependant Risk Assessment of Aging Ships Accounting for General/Pit Corrosion, Fatigue Cracking and Local Denting Damage”, SNAME Transactions, Vol.111, 2003.
74. Parunov J, Discussion on “Quas-Static Response”, Proceedings of the 16th International Ship and Offshore Structures Congress, Vol.3, Southampton, UK, August, 2006.
75. Parunov J, Discussion on “Ultimate Strength”, Proceedings of the 16th International Ship and Offshore Structures Congress, Vol.3, Southampton, UK, August, 2006.
76. Parunov J, Discussion on “Condition Assessment of Aged Ships”, Proceedings of the 16th International Ship and Offshore Structures Congress, Vol.3, Southampton, UK, August, 2006.
77. Parunov J., World Maritime Technology Conference and Exposition – WMTC & EXPO, San Francisco, CA, 17-20.listopada 2003. godine, Brodogradnja, Vol. 51, No.4, 2003.
78. J. Parunov, ISSC 2006 – 16th International Ship and Offshore Structures Congress, 20-25 August 2006, University of Southempton, UK, Brodogradnja, Vol 57, No.3, 2006.
79. J.Parunov, ISSC 2009 – 17th International Ship and Offshore Structures Congress. 16-21 August 2009, Seoul, Korea, Brodogradnja, Vol 60, No.3, 2009.
80. J.Parunov, ASDEPP – International Workshop Advanced Ship Design for Pollution Prevention,23 and 24 November 2009, Split, Croatia, Brodogradnja, Vol 60, No.4, 2009.
81.